1) All steel welded structure, vibrating treatment of ageining for removal of internal stress, with good rigidity and stability.
2)Mechanical/hydraulic synchronization systems are adopted(tilting of the sliding block is transmitted by a mechanical signal to hydraulic system, enabing sliding block to move smoothly).
3)CNC Control system will be used from Delem or Cybelec; Servo motors and driver are imported brand.
4)Electric parts: Siemens or Te.
5)Lower working tables fitted with Hydraulic crowning system.
|2||Length of working table ||4000||mm|
|3||Distance between columns||3600||mm|
|4||Throat depth ||400||mm|
|5||Ram stroke ||200||mm|
|6||Max. opening height ||450||mm|
|7||CNC axis (Y1,Y2, X+V)||3+1||axis|
|8||Main motor power ||11||KW|
|10||Backgauge Servo Motor||1kw||kw|
|10||Oil Tank ||400 ||L|Standard with:
|1||CNC system||DELEM-DA52S (Holland)|
|2||Main system pressure control valve block||HOERBIGER (Germany)|
|3||Synchronal control valve block||HOERBIGER (Germany)|
|4||High pressure purolator ||HOERBIGER (Germany)|
|5||Linear scale ||HEIDENHNAIN (Germany)|
|6||Main seals ||NOK (Japan)|
|7||Stroke switch , pushbutton ||SCHNEIDER (France)|
|8||Relay , contactor||SCHNEIDER (France)|
|9||Inner gear pump||Eckerle (Germany)|
|10||Ballscrew and linear guides||HIWIN or TBI or Hisaka (Taiwan)|
|11||Servo motor||Estun (Delem join-venture)|
CNC system: DA-52 at http://www.delem.com/index.php?p=product&parent=13&id=40&naam=DA-52
- Holland made DA-52S CNC system with control 3+1 axis ( Y1 , Y2 ,X +V axis ) ,
Left side CNC control panel with two elbow flexible movingOptions Accessories:
- Upper Die quick lock,
- Two front supporters: with linear guide (can moving left to right, up and down) , Support arms with inch ruler at 500mm
- Europe protection cover.
- One set concentric die and puncher, material: 42CrMo suitable for stainless steel bending; upper die is 800mm *5pcs, Segment die is required by the buyer
- Backside safe net with stroke-switch control
- Backguage: Daul linear guides with 4 fingers for Z axis manual, R axis manual
| ||Item ||Extra Costs|
|1||DA58T CNC system (Touch screen programming w/o 3D simulation)|
|2||DA66T CNC system (Touch screen programming with 3D simulation)|
|3||R axis (Control the backgauge up and down) || |
|4||Z1, Z2 (Control the backgauge Left/right moving) || |
|1||LNTECH Safety light curtain|| |
|2||UL wiring with safety Module|| |
|3||Goosneck tooling|| |